Snow blower Everest 603

With RURIS Everest 603 snow blower there are no limits or areas that cannot be cleaned. RURIS Everest 603 cutter it is designed for professionals for pedestrian areas where maintenance is required and necessary daily, regardless of the layer and hardness of the snow.

• Increased comfort

The comfort and pleasure of working are complemented by heated handles.

Engine power and gearbox enhance RURIS performance.

• Differential transmission

At the same time, for the rapid return around the axis, as close as possible to the area that needs to be cleared of snow or for the returns to the narrow areas, the snow blower is equipped with a differential on the transmission.

The drive wheels for travel does not have inner tube, precisely to allow the user to enter areas with large bumps.

The 40 cm wheel diameter makes any obstacle easily and safely escalated for the user. The high ground guard provided by the wheels protects the chassis and engine from hard objects or stones that can come in contact with the blades. The engine is turned on automatically.

The engine is equipped from construction with the Winter Engine function, for protection against frost and thus can start in any storage or frost conditions.

Also for the comfort of RURIS users,  Everest snow blower is equipped with a work headlight, in order to be able to work in any thermal conditions and on any surface, the headlight is with LED, to deal with any request.

The speed travel is in steps, depending on the thickness of the snow layer. The user can select one of the 6 +2 travel speeds and thus the time of use is correctly dimensioned and fuel consumption is reduced by more than 25%.

For frozen snow surfaces, the RURIS Everest 603 snow blower can grind and section the frozen snow due to the “Z” blade profile with which the snow blower is equipped. The surface loaded with frozen snow will remain perfectly clean as soon as possible.

The exhaust speed is provided by Turbine B4 with pallets positioned behind the blades, which have only one role, to project the snow remotely, without forcing the transmission and the engine. In this way, collected snow is taken over by Turbine B4, which projects it with force, at a great distance.

The snow jet control is done by the user on the control panel located on the chassis of the horn holder, by actuating the two control levers: 1. Angle setting lever up to 70 degrees. 2. Lever for setting the direction where the collected snow is to be stored, the orientation can be made left straight 190 degrees around the axis.